Hydraulic Slide and Levelers

[Kuchen]

Hope someone can help. We are having issues with our Hydraulic slide and levelers. Have called the 800 # and had us check the fuses but they were all good. Anyone have a suggestion?

[W8RLM]

Can you describe the problems and what you have tried other than the fuses? Also, what year, model, and length Winnebago do you have?

W8RLM - Bob

[George Z]

Originally Posted by W8RLM

Can you describe the problems and what you have tried other than the fuses? Also, what year, model, and length Winnebago do you have?

W8RLM - Bob

More info is definitely needed

[Kuchen]

We have a Winnebago Vectra 2007 - Slides and levelers are locked in place. Checked fuses and all seemed ok...wondering about a circuit breaker for this system.

[Kuchen]

We have checked the breakers and fuses. Winnebago Vectra 40TD 2007.

[joelm]

Not trying to be cute and my Winnebago is older, but my leveler switch must be "on", my ignition must be "on", the shift lever must be in "park" and the parking brake must be "set". You probably already know all this, but just trying to be helpful.

[Adventurer56]

I recently had the same problem. It turned out to be the main solenoid that is mounted down by the hydraulic pump. It had just gone bad. Once replaced all works well. Hope this helps.

[BBBEEBOP]

Call HWH Tech Support and be prepared to give them a goood description of your problem. They have been very helpful to me. 1 800 321 3494

[W8RLM]

I also had a solonoid go bad. It was replaced, and all was well.

I believe that there is a slide lock on your Vectra. I assume that you've unlocked it, although I don't know if it would have any effect on the jacks. My 2006 Journey has the straps for slideout protection instead of the key locks.

HWH and Winnebago Owner Relations as stated above are definitely the place to go before you take it to a shop.

Good Luck

W8RLM - Bob