I recently did an oil and filter change and I replaced my engines drain plug with a Fumoto Valve on my 2013 Winnebago Vista 30t. I use a 6 inch piece of 3/8 fuel line, I slip on the line to the Fumoto nipple and place into a Diesel fuel can (yellow jug 5 gallon) open valve and drain, the used 1 gallon ziploc bag to put over the filter (after breaking lose), spin off filter into ziploc bag, have new filter ready with thin coat of oil on new filter seal. Remove old filter in bag a spin on new one and tighten. Pour oil front ziploc into oil jug, seal ziploc bag and put old filter and bag into new filter box. Quick and easy no mess.