Dog House removal - '99 Vectra

[AndersG]

I've found that there is two angle brackets (one on driver side and the other on passenger side) secured to the floor with square headed screw heads. I have removed those but I'm still unable lift and remove it!? I saw in the manual, something about

"Insert the supplied hex wrench into the hole in the top rear edge of the engine cover". I have looked and I just can't find a hole for inserting an allen wrench!?


Any suggestions/images?? Any assistance is greatly appreciated!

[AndersG]

I spent some time poking the carpeting on the doghouse and found the hole!
See picture below!

Originally Posted by AndersG

I've found that there is two angle brackets (one on driver side and the other on passenger side) secured to the floor with square headed screw heads. I have removed those but I'm still unable lift and remove it!? I saw in the manual, something about

"Insert the supplied hex wrench into the hole in the top rear edge of the engine cover". I have looked and I just can't find a hole for inserting an allen wrench!?


Any suggestions/images?? Any assistance is greatly appreciated!