Coleman basement air parts

[Journey cat]

I in the process of gathering parts to upgrade my basement air in an 05 Journey . I have not begun to start the job as yet !

I have the outside plastic blower wheel .
And the bearings .

I'll figure it out when the unit is pulled .
What I do know is that you use the original bracket to retain the new bearing .
I see the bearing I have has a rubber around the outside .
Im thinking this may need to be removed to install it in the original bracket .
Can any one confirm my thoughts on that ?

What Im still searching for is a Plastic inside blower wheel . I believe the number for that is 1472-1151 .
Im having a hard time locating one under that number . Has it been changed ?
Naturally I'm hoping to get the best price possible on one .
Any help on these questions will greatly be appreciated

[Journey cat]

Found a 1472-1151 At Dyers and purchased it .
It Cost a tad more than the out side wheel .
Although I now have whats needed .

[neub]

I recently refreshed our ac in our 2005 journey a couple months ago. You do not need to remove the rubber around the bearing. Bearings and the new
carriers bolt right in as shipped. I replaced all capaciters and starters as well and kept the old ones as emergency spares.

[Journey cat]

I’ll take your word on that. I had read Duners instructions where he said he used the old carriers I’ll find out when I get into it I’ve also thought about the Starters & capacitors. . Although I’m on the fence at present as the unit has very little use on it Something in my head keeps telling me. If it’s not broken Don’t fool with it. Although I may break that rule. Do you have numbers for them ?

[neub]

I followed Duner's procedure as well
The only capacitor that would be a pain to change in the future is the enterior fan as the capacitor is mounted on the fan housing and you need to pull the ac out.

[Journey cat]

With that being said . Is the reason Im on the fence with the Caps & Starters .
Although , being curious . Im egar to see if the bearing carriers will work proper . There was also a mention on doing some trimming to install the inner blower wheel . Did you change yours ?

[neub]

Didnt save the part numbers but took them off airexcel's pdf for 6535 repair parts

[Journey cat]

Ive seen that in the past . Thanks ! Ill post it here for others who may need it
http://www.rvcomfort.com/pdf_documents/r474_copy1.pdf