A&E 2 step awning problem
This may be a bit tricky explaining what part I'm looking for. On my 2 step manual awning there is a Plastic piece that joins two pieces of rail. This piece is broken on both sides of the awning, front and rear. In its current condition it allows the rail to bend in an manor similar to a hyper extended elbow. The awning will roll out properly but because the arms are bent in a way opposite of the intended design it will not roll up on its own. It requires 2 people one on each end to pull the awning arms down to allow it to retract properly. Now I know what the problem is I cannot find the parts anywhere. When the awning is in it's retracted position this piece is located on the bottom of the rails facing away from the MH. My RV shop has attempted to locate the part but so far with no luck. All the drawings of the awning I have been able to pull up do not even show this piece. I don't even know what the piece is called. Does anyone have an Idea what the part is called or where it may ordered from? The awning is on a 2007 Voyage.