2007 winnebago headlight change

[Davec]

Hi guys I'm over in the UK
I have a winnebago journey 36g it has the pontiac grand am headlights. I've retro fitted a new set of headlights with led projectors and halos
However how do I get the old ones out? I can see the light chassis then fits into a secondary frame that then attaches to another bracket that attaches to the body
I've managed to get the two bolts out that attach it on the inside edge but the two outside edge bolts I just can't get access too

Can anyone help please

[Johnnyg]

I bought 2 new assemblies thinking they would be easy to swap out. The rv shop in my area took a stab at it and said the front cap would have to be removed!! Decided to hold off till the end of the summer then take another shot at it.
Just changing a bulb is a pita!
Good luck.
Please post if you figure out how to do it.

[Davec]

Originally Posted by Johnnyg

I bought 2 new assemblies thinking they would be easy to swap out. The rv shop in my area took a stab at it and said the front cap would have to be removed!! Decided to hold off till the end of the summer then take another shot at it.
Just changing a bulb is a pita!
Good luck.
Please post if you figure out how to do it.

they are out i was trying to remove the wrong things 2 x 10mm bolts on the top and a star bolt holding in the bottom light adjuster took 15 mins for the passenger side and 30 for the drivers but that was because access is super tight
i found a guide on here that was really helpful
going to have to trim the bracket so the new led projectors will slide through only other issue is the adjusters im really tempted to match the settings to my old lights on the bench and not even attempt to put the adjusters back in