 |
07-07-2019, 07:36 PM
|
#1
|
Winnebago Camper
Join Date: Aug 2018
Location: Lakeside, CA
Posts: 26
|
Towing a Wrangler
Question to those of you toading a Wrangler, do you use a base plate or tow bar brackets attached to the Jeep's bumper? I'm concerned that a base plate will reduce my ground clearance.
__________________
Doug & Linda & Tommy (the 18 lb cat)
'19 Forza 34T
'20 Jeep JLR
|
|
|
07-08-2019, 02:40 PM
|
#2
|
Winnie-Wise
Join Date: Feb 2017
Location: Denver, CO
Posts: 364
|
Lots of options. I went with an aftermarket bumper rated to tow (LOD). Some add a Currie Industries skid plate.
|
|
|
07-08-2019, 03:19 PM
|
#3
|
Winnebago Camper
Join Date: Jun 2019
Posts: 5
|
Base plate will not reduce ground clearance.
|
|
|
07-08-2019, 05:43 PM
|
#4
|
Winnebago Owner
Join Date: Jan 2018
Location: Western PA
Posts: 97
|
|
|
|
07-14-2019, 05:26 PM
|
#5
|
Winnebago Owner
Join Date: Mar 2017
Location: Chino Valley, Arizona
Posts: 64
|
I use the tow bar brackets attached to the heavy duty bumper that has a winch.
 https://photos.google.com/share/AF1QipPVxklOjmQS2u1IQSUFRtOanpcNs48zAwkL2XUy2BaDE2 _BxcK_VgovLAdBLf-GAw/photo/AF1QipPDLFPHZl5heqn2tN5SqFfse1rj-ve9lFz9flY2?key=V2VQMEFhd1hNUTNwS0hickg1ZFVfQnhTd1 9ZUkx3
I also went to Tractor Supply and got the 5/8 PTO pull pins. Made hooking and unhooking much easier.
__________________
2016 Holiday Rambler Ambassador towing 2010 Jeep Wrangler
|
|
|
07-14-2019, 06:12 PM
|
#6
|
Winnebago Camper
Join Date: Feb 2019
Posts: 22
|
I used the Roadmaster tow bracket, works fine and doesn't reduce clearance. After installing the bracket I wanted to add a winch and new bumper, but couldn't find a bumper I liked that would co-exist with the tow bracket. Ended up getting a winch bracket that attached directly to the original bumper. In retrospect I would have bought a replacement bumper/winch that I could could attach the Blue Ox towbar directly to.
20/20 is a wonderful thing!
__________________
Keith Pollard
2019 Sunstar 27 PE
2016 Jeep Wrangler
|
|
|
07-14-2019, 06:35 PM
|
#7
|
Winnebago Camper
Join Date: Oct 2004
Location: Huntsville, TX
Posts: 42
|
Towing a Wrangler
If you plan to take it off-road, do not use a tow plate. It will be damaged or torn off. I recommend buying a steel bumper with D ring tabs and connecting your tow bar to them. You can buy adapters to fit the D ring holes. That is what I use. I have never tried to bolt tow tabs to the stock bumper, but it appears to be a bit light for that under the plastic.
|
|
|
07-14-2019, 07:36 PM
|
#8
|
Winnebago Owner
Join Date: Sep 2011
Location: Crawfordville Florida
Posts: 204
|
My Wrangler has a rather thin metal bumper not covered with plastic. I bolted a 1/4 inch metal plate on the back side of the bumper at the frame. The bolts also fasten the 1/4 inch plate on the front surface of the bumper. I had these plates made with metal brackets welded to them with the holes drilled for the tow bar pins. It works fine and I have never had any problem.
__________________
I have no Idea!
|
|
|
07-15-2019, 01:00 AM
|
#9
|
Winnebago Owner
Join Date: Sep 2018
Location: El Dorado Hills, CA
Posts: 54
|
Wrangler tow car
We have a 2018 Wrangler JL with auto trans that is a great tow vehicle.
We just got back to the Sacramento foothills from a trip to Astoria, OR
I set it up with a Roadmaster bracket assembly that fits inside the original factory cover beneath the front bumper. Does NOT reduce clearance and is barely noticeable with the slide in junction brackets removed. I only install them while hooking up to the tow bar assembly.
Attached to the Winnebago Vista RV I use a Ready Brute tow bar with the integral Ready Brake set up, eliminating having to use a brake system in the Jeep. This is a very simple mechanical component that clips onto and pulls the permanent cable that I installed from the front of the Jeep to it’s blank pedal.
Very Simple and very effective.
|
|
|
07-15-2019, 06:44 AM
|
#10
|
Winnebago Watcher
Join Date: May 2019
Posts: 3
|
Base plate is the best way to go.
|
|
|
07-15-2019, 08:05 AM
|
#11
|
Winnebago Owner
Join Date: Jun 2019
Posts: 229
|
Quote:
Originally Posted by NC4us
Base plate is the best way to go.
|
Why?
__________________
2008 Voyage 35L, Allison 6 speed auto and GM Workhorse 8.1 gas
|
|
|
07-15-2019, 08:51 AM
|
#12
|
Winnebago Watcher
Join Date: May 2019
Posts: 3
|
Baseplate security
Hello, using the baseplate provides secure mounting without the worry of bumper integrity. There is no loss of ground clearance, I looked at a lot of options before deciding on the baseplate and have never regretted it. I tow a 2005 TJ.
|
|
|
07-15-2019, 08:53 AM
|
#13
|
Winnebago Owner
Join Date: Mar 2017
Location: Chino Valley, Arizona
Posts: 64
|
Quote:
Originally Posted by NC4us
Base plate is the best way to go.
|
Why?
__________________
2016 Holiday Rambler Ambassador towing 2010 Jeep Wrangler
|
|
|
07-15-2019, 10:49 AM
|
#14
|
Winnebago Owner
Join Date: Jun 2019
Posts: 229
|
Baseplate or bumper tow for wrangler
I can see where a base plate may be stronger, but a properly set up bumper system seems to be a great system. I haven't done any off road slogging in years, but I can see where a baseplate could get hung up.
Plus, I can see where chomping through some deep slushy snow could be tough on a baseplate; after all it's not coming off when in regular use. I'm too old to get serious about extreme terrain but ground clearance is so helpful to avoid getting stuck! Been there done that in deep soft sand hills.
I am curious how much clearance is sacrificed with a base plate on a jeep.
__________________
2008 Voyage 35L, Allison 6 speed auto and GM Workhorse 8.1 gas
|
|
|
07-15-2019, 11:53 AM
|
#15
|
Winnebago Watcher
Join Date: May 2019
Posts: 3
|
I guess you’d have to figure out what you want the Jeep to do when unhooked. I want the strongest attachment when towing, and I run with taller suspension so I don’t worry about clearance.
|
|
|
07-15-2019, 08:22 PM
|
#16
|
Winnebago Owner
Join Date: Mar 2016
Location: CT
Posts: 62
|
Quote:
Originally Posted by Edbehl
We have a 2018 Wrangler JL with auto trans that is a great tow vehicle.
We just got back to the Sacramento foothills from a trip to Astoria, OR
I set it up with a Roadmaster bracket assembly that fits inside the original factory cover beneath the front bumper. Does NOT reduce clearance and is barely noticeable with the slide in junction brackets removed. I only install them while hooking up to the tow bar assembly.
Attached to the Winnebago Vista RV I use a Ready Brute tow bar with the integral Ready Brake set up, eliminating having to use a brake system in the Jeep. This is a very simple mechanical component that clips onto and pulls the permanent cable that I installed from the front of the Jeep to it’s blank pedal.
Very Simple and very effective.
|
Can I ask what the electrical connection is below your license plate?
__________________
2010 Winnebago Vista 32K
|
|
|
07-16-2019, 12:26 AM
|
#17
|
Winnebago Owner
Join Date: Sep 2018
Location: El Dorado Hills, CA
Posts: 54
|
The Roadmaster bracket comes with a 6 prong plug socket that I used to put my turn, running and brake lite harness to
I use a coil type 7 pin to 6 pin junction cable between the RV and Jeep that plugs into sockets on each end for easy hook up
|
|
|
09-05-2019, 11:12 PM
|
#18
|
Winnebago Owner
Join Date: Sep 2018
Location: El Dorado Hills, CA
Posts: 54
|
Look at the pictures I posted above
The baseplate does not hang below the factory shield but the baseplate junction brackets insert through it and turn to lock in place with spring loaded retaining pins, which remove in seconds when disconnecting the bar
|
|
|
 |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|