Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-12-2019, 06:44 PM   #1
Minnie Plus 27BKSS
 
Join Date: Jun 2018
Posts: 2
No water pressure

I am stationary and haven't moved my RV since October 2018. Everything has been working well until last night. Suddenly, I have no water pressure to the bathroom sink. Shower is fine. Kitchen is fine. No evidence of leakage under trailer although I have an enclosed underbelly stuffed with insulation. What should I look for? I have an extended warranty but I don't even know what questions to expect when I call them. Your help is appreciated.
GinGin is offline   Reply With Quote
Old 06-14-2019, 06:02 PM   #2
Winnebago Owner
 
workinrvers's Avatar
 
Join Date: Dec 2012
Location: Black Hills, South Dakota
Posts: 90
check the screen on the faucet to see if it is clear. They sometimes get clogged with small amount of calcium buildup that will restrict the flow of water. You should be able to unscrew the screen from the end of the faucet to inspect and clean.
__________________
Phil and Rudee
'02 Winnebago Journey, '07 Dakota, '11 HD Ultra
http://workinrvers.blogspot.com/
workinrvers is offline   Reply With Quote
Old 06-14-2019, 10:22 PM   #3
Minnie Plus 27BKSS
 
Join Date: Jun 2018
Posts: 2
It worked

Thank you for your good advice. There was like a small piece of plastic in there. Weird that it just now showed up. You certainly saved me a lot of hassle.
I am interested in your work camp experience but I didn't see a way to contact you on your blog.
Ginny
GinGin is offline   Reply With Quote
Old 06-27-2019, 06:09 AM   #4
Winnebago Watcher
 
Join Date: Jun 2019
Posts: 1
Had same issue on 2008 Winnebago-Journey except my small piece of "nylon" was caught in connection below sink. All was well until I started to winterize my unit and that is when I discovered where the piece of nylon came from. The flow control valve on the water heater that prevents water from flowing into heater when in bypass mode had failed. There is a small piece of nylon (plug) and spring located within that valve, all I had left was the spring, the "plug" was gone and was allowing the RV-antifreeze to "back flow" into the heater. Replaced valve and all is good again.
Dan Marken is offline   Reply With Quote
Old 08-13-2019, 02:26 PM   #5
04 Meridian 36G dp
 
Join Date: Feb 2014
Location: Mesa Az
Posts: 6
Where is the flow control valve? It may be my problem.
marv h is offline   Reply With Quote
Reply

Tags
water


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
No water pressure inside mh on city water capdata Plumbing | Systems and Fixtures 10 02-16-2014 05:00 PM
Atwood hot water heater low pressure kscouple52 Plumbing | Systems and Fixtures 12 01-13-2009 02:46 AM
Hot water - no pressure no flow KE0M Plumbing | Systems and Fixtures 18 01-24-2007 04:10 AM
water pressure Outbumn Plumbing | Systems and Fixtures 9 11-27-2006 08:15 AM
Water pressure no18yes Plumbing | Systems and Fixtures 13 07-19-2006 03:31 PM

» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:43 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.