I have checked both fuse locations and the fuses are ok. I can find no power going to the switches. I checked them in the on and off position. If there another place to check? I looked at the electric schematics with no joy.
Just a quick thought because that happened to me. I forgot to switch on the coach battery switch. Since the Travato was our very first RV, I didn’t realize I had to do that. The Salesman went over things so quick when we picked it up, it was difficult to remember everything. I take it to a Winnebago dealer closer to my home for service, and they are extremely helpful in explaining things I don’t understand.
__________________
Ron and Cindy
2021 Minnie Winnie 22M
2020 Travato 59K
Thanks, the power is on to the coach. I leave it on most of the time so the fridge will stay cold. The wiring diagram shows a relay behind the switches where I can't get to. Maybe that. Also you know the awning won't work if the motor is running. Could be a problem with that. This awning has always worked when it wanted to but I guess I will have to take it in.
Wish I had a good dealer close by but there are a couple of local shops that work on small RVs like the Travato.
I’m lucky to have a good dealer. They are about 30 miles away from me. I’m going there Friday. I have to have the kitchen faucet replaced. It developed a crack somehow, but it’s still under warranty. I also had an issue with the awning not going out. But I found that if I hit the retract switch, it reset itself and worked fine. How do you like the Norcold Fridge?
__________________
Ron and Cindy
2021 Minnie Winnie 22M
2020 Travato 59K
Hi,
I recently purchased my 2016 59K Travato and haven't been able to find/locate where the 2nd fuse is located. I found the obvious one in the main fuse box but see you've indicated that there is a second one. Can you point me in the right direction? TIA
It is in the "B" column as I recall but the electric schematics are on Winnebago's website.
Also I finally figured out that my awning trouble was mostly me! After you bring it in, hit the in switch again. Then the out switch will work. You have to make sure one is off before the other will work.