My leads were underneath the center of the dash behind my center console. The antenna lead and red and black power wires were also right there and worked great! I hope this helps.
Somewhere I read that my 2012 Itasca Meridian 36M is prewired for CB. I'm speaking 12v power, not antenna.
I looked all over the place and, for the life of me, I could not find anything that even closely resembled a 12v hot lead. Can anybody help me?
In the owner’s manual (not the supplement) I believe in section 3 there's a description as to where the wires should be. In our manual there is also a picture of the wires in that location. The wires are supposed to be (haven't checked for them yet) yellow and white. Both should be labeled and inside a plastic sleeve.
I had to remove the big cover over the instrument cluster and then just look for white and yellow wires on the left side. I had to really look around...but I did find them! I think the Winnebago technicians hide them to mess with us...LOL
__________________
Jeff, Dawn and two teenagers
2013 Winnebago Vista 35B
Tow dolly, boat or trailer with scooters!
Wait until you look for their pre-wired electric brake controller wires. That too is a lot of fun !!!!! not. I ended up calling Winnebago and they emailed me picture of what the wires looked like and where they were.
__________________
[SIGPIC][/SIGPIC]2016 Newmar Dutch Star 4369
Newmar Owners Club
USAF 1966-1969 Law Enforcement 34 years, retired in 2003
I think they like to keep us on our toes. I can just see them getting together and saying." where do you think we can put these wires so they can't find them?"