I'm in the process of waxing my new Winnebago Sightseer 29R and I noticed two brackets located near the top of the MH and just in front of each of my two slide outs. Nothing is attached to either of the brackets. The brackets appear to be made from aluminum extrusions and have an extruded slot.
I suspect the brackets may have something to do with the slide outs but their function isn't clear. I'm wondering if they are used in installing the slide outs or perhaps for maintenance.
I'm in the process of waxing my new Winnebago Sightseer 29R and I noticed two brackets located near the top of the MH and just in front of each of my two slide outs. Nothing is attached to either of the brackets. The brackets appear to be made from aluminum extrusions and have an extruded slot.
I suspect the brackets may have something to do with the slide outs but their function isn't clear. I'm wondering if they are used in installing the slide outs or perhaps for maintenance.
JD - I'm betting your slideouts are extended. When you bring them in and the topper rolls up their function will be revealed. The small arm at the end of the topper rotates as the topper comes in. When it's almost all the way in, the arm contacts those brackets and causes the roller to lock.
At least that's my guess after looking at the topper install manual. You should have one in your "big black bag".