|
05-09-2014, 12:12 PM
|
#1
|
Winnebago Watcher
Join Date: Mar 2011
Location: Salem, Illinois
Posts: 4
|
Mud flaps on Sunova 33c
I am thinking about putting mudflaps behind the duals on our Sunova 33c.
Has anyone done this? Did it do any good?
|
|
|
05-09-2014, 12:26 PM
|
#2
|
Winnie-Wise
Join Date: Oct 2013
Location: Altoona, Iowa
Posts: 419
|
Quote:
Originally Posted by lrose44
I am thinking about putting mudflaps behind the duals on our Sunova 33c.
Has anyone done this? Did it do any good?
|
Me too. I put them on my previous coach. I made them out of semi truck mud flaps that I got from a truckstop. I think that they are a good idea and should have been part of the package from the factory.
__________________
2010 Itasca Sunova 33C (a lot of modifications)
2004 Jeep Rubicon, 34K miles (highly modified)
Three cats and the wife
|
|
|
05-09-2014, 04:17 PM
|
#3
|
Winnebago Watcher
Join Date: Mar 2011
Location: Salem, Illinois
Posts: 4
|
Thanks for the reply.........on the drivers side I will need to build a bracket of some kind. Thought I would keep them about 8 inches off the ground.
Found the right size flaps at Rural King....$7 each
|
|
|
05-10-2014, 10:31 AM
|
#4
|
Winnie-Wise
Join Date: Oct 2013
Location: Altoona, Iowa
Posts: 419
|
Quote:
Originally Posted by lrose44
Thanks for the reply.........on the drivers side I will need to build a bracket of some kind. Thought I would keep them about 8 inches off the ground.
Found the right size flaps at Rural King....$7 each
|
Ours is in storage as of now so I can't take a look at it. I can show you a picture of how the passenger's side behind the duals looked upon picking it up from the dealer. I didn't notice it until I got the thing home and then I was a bit perturbed by it!
__________________
2010 Itasca Sunova 33C (a lot of modifications)
2004 Jeep Rubicon, 34K miles (highly modified)
Three cats and the wife
|
|
|
05-14-2014, 04:02 AM
|
#5
|
Winnie-Wise
Join Date: Aug 2004
Location: Oregon
Posts: 477
|
I pout a set of Mud Flaps on our SUNSTAR. Yes I had to build a bracket to extend them down. I used 24" X 36" Mudflaps and also a Anti Sail bracket. I added a piece of sheet metal to the top and attached it to the framework for the coach with self drilling screws.
__________________
Retired Navy Submariner
2014 Itasca Sunstar 35F; 5 Star tuned; 2014 Jeep Cherokee TrailHawk
|
|
|
10-26-2015, 08:54 AM
|
#6
|
Winnie-Wise
Join Date: Oct 2013
Location: Altoona, Iowa
Posts: 419
|
Quote:
Originally Posted by lrose44
I am thinking about putting mudflaps behind the duals on our Sunova 33c.
Has anyone done this? Did it do any good?
|
Finally got mine made and put on. Used 24" x 36" truck mudflaps that I got at a Pilot truck stop and stainless steel anti-sail bottom trim. Mine are about 4"-5" off the ground while traveling. So far they seem to work well. I should have done this 5 years ago when we got the MH but just didn't get around to it.
__________________
2010 Itasca Sunova 33C (a lot of modifications)
2004 Jeep Rubicon, 34K miles (highly modified)
Three cats and the wife
|
|
|
10-27-2015, 06:20 AM
|
#7
|
Winnebago Camper
Join Date: Oct 2013
Posts: 24
|
Can't have enough mud flaps in my opinion. Our Suncruiser had pitifully small flaps from the factory, so I got some rubber matting and added to them. Makes a big difference in keeping the underbody of the rig clean. They don't protect the underbody metal very good, and rust can start real easy. I would advise anyone with a new coach to just get under it and look around real good. You will probably be surprised by what you find.
|
|
|
10-27-2015, 06:33 AM
|
#8
|
Winnebago Owner
Join Date: Jul 2012
Posts: 122
|
My unit had the rear flaps installed when I bought it. The next summer I got some old flaps from my local trucking company and made a set for the front.
I can't really tell if it does any good but it sure can't hurt to have these on.
I just had to be sure that the front jacks cleared the 'new' flaps.
Everything worked out great and this is my second year south with them on.
No problems that I am aware of.
__________________
2001 Winnebago Adventurer 32V, Ford F-53, V-10
2008 Jeep Grand Cherokee Limited, 4.7L V-8 QTII
U. S. Army Vet, In God We Trust
|
|
|
10-27-2015, 06:42 AM
|
#9
|
Winnebago Camper
Join Date: May 2013
Location: CT
Posts: 8
|
PETEYBOY,
You are absolutely correct about mudflaps and checking underside. I roll around under mine every spring doing paint touchup,looks better than new. Mudflaps like what AAUUMMM has, helps greatly, looks sharp too!
__________________
Rapid Rick
2013 Fleetwood Terra 35K
|
|
|
10-27-2015, 11:49 AM
|
#10
|
Winnebago Owner
Join Date: Dec 2014
Location: Northern Arizona
Posts: 121
|
Quote:
Originally Posted by aauummm
Finally got mine made and put on. Used 24" x 36" truck mudflaps that I got at a Pilot truck stop and stainless steel anti-sail bottom trim. Mine are about 4"-5" off the ground while traveling. So far they seem to work well. I should have done this 5 years ago when we got the MH but just didn't get around to it.
|
Those look nice. I have been considering doing this also but have not figured out the best way to mount them. Seems some metal fabricating will have to be done which I assume you did as well.
__________________
2014 Itasca Sunova 33C towing a Jeep TJ Wrangler
|
|
|
10-27-2015, 12:36 PM
|
#11
|
Winnie-Wise
Join Date: Oct 2013
Location: Altoona, Iowa
Posts: 419
|
Quote:
Originally Posted by 530ktm
Those look nice. I have been considering doing this also but have not figured out the best way to mount them. Seems some metal fabricating will have to be done which I assume you did as well.
|
Actually I didn't do any metal braces or anything. The passenger's side I screwed them into the storage compartment wall behind the braces and on the driver's side I just screwed them to the steel braces that were already there. The driver's side lacked a brace toward the fuel tank direction and down low, but I didn't need one there anyway as the flap is braced by the suspension.
With the 36" length of the flap I was able to cover the whole backside of the wheel well clear up to the underside of the flooring. I used a large washer on each screw so that the screw wouldn't pull through the flap. So far it's working well.
__________________
2010 Itasca Sunova 33C (a lot of modifications)
2004 Jeep Rubicon, 34K miles (highly modified)
Three cats and the wife
|
|
|
10-27-2015, 01:44 PM
|
#12
|
Winnebago Watcher
Join Date: Sep 2012
Location: Grants Pass, OR
Posts: 3
|
We suggest you may want to use polyethylene material instead of rubber. That material will not crack, fade or peel like rubber eventually will. As long as you get at least 3/8" thick, they also will not fly up behind as you move down the road so it is not necessary to get weights of antifly frames.
There are many different ways to create hanging points. Do not attach them to your fiberglass compartments. Here are samples of different ideas from down and dirty to well fabricated. They all work.
Just try to have the mud flap 1" further out on each side of the tires if the room allows, and within 6" of the ground to give the protection you need.
__________________
Nina, Grants Pass, OR
|
|
|
10-28-2015, 06:47 AM
|
#13
|
Winnebago Camper
Join Date: May 2013
Location: CT
Posts: 8
|
[QUOTE=DuraFlap;2801262]We suggest you may want to use polyethylene material instead of rubber. That material will not crack, fade or peel like rubber eventually will. As long as you get at least 3/8" thick, they also will not fly up behind as you move down the road so it is not necessary to get weights of antifly frames.
I used the duraflap mudflaps, didn't have to, but added stainless louvered anti sail panels and louvered weights,because well,aah they look really cool . Sometimes glitz needs to be added to make the function part seem less like work........and I told my DW they were absolutely necessary to ensure the proper function of the mudflaps,{she knows better after all these years}.
__________________
Rapid Rick
2013 Fleetwood Terra 35K
|
|
|
08-02-2016, 08:06 AM
|
#14
|
Winnebago Owner
Join Date: Oct 2014
Location: Cypress River Manitoba
Posts: 84
|
I have the conventional mud flaps behind the duals but also there is a full width flap quite a bit further back. Actually just aft of the fuel tank. That full width flap comes very close to the ground and I feel that it 'flicks' up stones at the toad.
Any thoughts on how much clearance the full width flap should have, or if it's necessary at all.
Thanks in advance
__________________
2004 Itasca Sunrise W22 chassis GM 8.1 Allison 1000 Towing a 2007 Chevy Cobalt four wheels down.
|
|
|
08-02-2016, 04:06 PM
|
#15
|
Winnebago Camper
Join Date: Apr 2015
Location: Rogers, AR
Posts: 45
|
That full width flap comes very close to the ground and I feel that it 'flicks' up stones at the toad.
I would agree. Years ago we pulled a travel trailer with a Pu. I got the idea big flaps would be a good idea since we traveled on rock roads around the lake. After I installed the flaps, the entire front area of the camper that was flat, tongue, gas tanks, battery box etc. was covered with rocks when we got to the camp site. Never was like that before the flaps, so the flaps didn't last long. Don't see why a motorhome would be much different.
__________________
2017 Fleetwood Discovery 40D w/2012 CRV toad
|
|
|
08-03-2016, 07:30 AM
|
#16
|
Winnebago Owner
Join Date: Oct 2014
Location: Cypress River Manitoba
Posts: 84
|
Thanks alank. I've removed the long wide flap for now and if I feel I need it I think I'll make it about a couple of inches higher. Any other thoughts?
__________________
2004 Itasca Sunrise W22 chassis GM 8.1 Allison 1000 Towing a 2007 Chevy Cobalt four wheels down.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|