Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-14-2019, 08:37 PM   #1
Winnebago Camper
 
Join Date: Oct 2013
Posts: 7
HWH Z Slide

I hope some one has a solution to my problem.
I have a 2004 Itasca Horizon with HWH z slide on the curb side. This slide creeps in 2-6 inches when parked. This doesn't happen all the time but more than not. Fluid good. Have run slide in and out. Anyone experienced this problem?
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara
pcfr2 is offline   Reply With Quote
Old 04-14-2019, 11:09 PM   #2
Winnebago Master
 
Join Date: Oct 2017
Location: Elk Grove, CA
Posts: 1,263
Your best bet is to send a private message to Tireman9. He's an HWH employee who's been a great help to me and other Winnieowners.
__________________
Bob C
2002 Itasca Suncruiser 35U
W20 Chassis
BobC is offline   Reply With Quote
Old 04-15-2019, 08:39 AM   #3
Winnebago Camper
 
Join Date: Oct 2013
Posts: 7
Thanks, Will try to contact Tireman9.
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara
pcfr2 is offline   Reply With Quote
Old 04-15-2019, 10:47 AM   #4
Winnebago Master
 
cbeierl's Avatar
 
Join Date: Aug 2005
Location: Nashua, NH
Posts: 1,479
Quote:
Originally Posted by BobC View Post
Your best bet is to send a private message to Tireman9. He's an HWH employee who's been a great help to me and other Winnieowners.
'Azpete' is the HWH employee in I'm familiar with on these forums. I thought Tireman9 worked with tires?
__________________
Chris Beierl

2005 Winnebago Vectra 36RD
cbeierl is offline   Reply With Quote
Old 04-16-2019, 06:40 PM   #5
Winnebago Camper
 
Join Date: Oct 2013
Posts: 7
I will try contacting "Azpete" Tireman9 didn't know anything about HWH slides. Thanks for the refer.
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara
pcfr2 is offline   Reply With Quote
Old 04-16-2019, 07:14 PM   #6
Winnebago Master
 
cbeierl's Avatar
 
Join Date: Aug 2005
Location: Nashua, NH
Posts: 1,479
Quote:
Originally Posted by pcfr2 View Post
I will try contacting "Azpete" Tireman9 didn't know anything about HWH slides. Thanks for the refer.
I'm sure Paul Maddox (azpete) is who Bob meant to refer to...

If you search for Paul's posts (here and on iRV2.com) you should find his cell # as well--he's posted it many times.
__________________
Chris Beierl

2005 Winnebago Vectra 36RD
cbeierl is offline   Reply With Quote
Old 04-16-2019, 11:34 PM   #7
Winnebago Master
 
Join Date: Oct 2017
Location: Elk Grove, CA
Posts: 1,263
Quote:
Originally Posted by cbeierl View Post
I'm sure Paul Maddox (azpete) is who Bob meant to refer to...

If you search for Paul's posts (here and on iRV2.com) you should find his cell # as well--he's posted it many times.
My bad, thanks for your faith in me. These guys are my two favorite experts, and I don't know how I mixed up their names. My apologies to both of them.
__________________
Bob C
2002 Itasca Suncruiser 35U
W20 Chassis
BobC is offline   Reply With Quote
Old 04-21-2019, 08:01 PM   #8
Winnebago Camper
 
Join Date: Jul 2016
Posts: 22
had same problem at GNR, needed a new actuator (think this is the wrong word) but, the factory put one in and we went
on our way.
__________________
2007 Itasca Meridian 350 Cat
Retired Navy, Tired wife , 2 cats.
Blue Ox 08 Subaru Legacy
Chiefig is offline   Reply With Quote
Old 04-21-2019, 09:20 PM   #9
Winnebago Master
 
AFChap's Avatar
 
Join Date: Aug 2002
Location: ...hopefully on the road!
Posts: 1,577
Don't know what a "Z" slide is, but the normal problem when a slide creeps in is bad extend solenoid. There are a couple of other possibilities, but this has always been my issue. Easy to replace, but not as easy to figure out which one to replace after you find them on/next to the HWH fluid reservoir.
__________________
Paul (KE5LXU) ...was fulltimin', now parttimin'
'03 Winnebago UA 40e / '05 Honda Odyssey toad
AFChap is offline   Reply With Quote
Old 04-22-2019, 02:28 PM   #10
Winnebago Camper
 
Join Date: Oct 2013
Posts: 7
Sorry the slide is a HWH X slide normally found on the curb side. But sounds like you may have the issue's solution.
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara
pcfr2 is offline   Reply With Quote
Old 04-22-2019, 05:46 PM   #11
Winnebago Camper
 
Barny750's Avatar
 
Join Date: Sep 2018
Location: Albany, Oregon
Posts: 15
HWH Jacks

Maybe someone has a idea what could be my issues. Or know someone to call or some kinda heads up up...
Always from day one, and the sales dude didn't help out much other then it will break I. "RIGHT" ... When I retracting the driverside "the living room slide" the rear of the slide lags really bad. It's almost like the hydraulic isn't pumping fluid to the slave cylinder. Last time I pushed on it and seem so move freely. Kinda. But maybe not... Any idea folk would be wonderful.

PS. I been wanting to post then for quit sometime.
__________________
Barny
04 Adventure
Barny750 is offline   Reply With Quote
Old 04-23-2019, 08:04 AM   #12
Winnebago Camper
 
Join Date: Jul 2016
Posts: 22
Like I said in a earlier post, it is probably something to do with the slide solenoid.

http://www.hwhcorp.com/ml20673aafaq....rPartQuestions
__________________
2007 Itasca Meridian 350 Cat
Retired Navy, Tired wife , 2 cats.
Blue Ox 08 Subaru Legacy
Chiefig is offline   Reply With Quote
Old 04-25-2019, 12:52 PM   #13
Winnebago Camper
 
Join Date: Oct 2009
Posts: 6
its out of synchronization. when you pull it in, hold the button for about 15 seconds after both sides of the rooms are in tight. this should get the sync cylinder in the right position..
if this doesnt work, do the same with it fully extended.
you may have to do a hose A bleed, to get it to sync up.its in the service manual. if you need one, its on the hwh website, or email me at [email protected].
running it out part way several times causes this problem. salesmen are the worst for doing this.
i know, i was a winnebago salesman once.
paul maddox
i do work for hwh full time. i do not sell parts or solicit service work on this forum.
pfmaddoxsr is offline   Reply With Quote
Old 04-30-2019, 10:38 AM   #14
Winnebago Camper
 
Join Date: Oct 2013
Posts: 7
Paul, Thank you ,thank you your suggestion about holding slide in for 15 sec worked.
Easy fix if you know the solution. Thanks again.
__________________
Mike & Jeannie
Retired A/C Pasco County Fire Rescue
2004 Itasca Horizon 40KD / 2013 Jeep Sahara
pcfr2 is offline   Reply With Quote
Reply

Tags
hwh, slide


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Intermittent HWH slide-out malfunction B Kane Electrical | Charging, Solar and Electronics 15 06-01-2013 07:58 PM
Power Gear vs HWH slide/jack mechanisms bdc278 General Maintenance and Repair 10 11-02-2011 04:31 PM
Winnie or HWH for Slide Adjustment? RickO General Maintenance and Repair 12 07-26-2010 10:32 PM
HWH bedroom slide problem Martind4 General Maintenance and Repair 9 01-19-2010 03:41 PM
Split HWH hose on bedroom slide-out NASAGuy General Maintenance and Repair 9 12-08-2006 12:31 PM

» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 04:31 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.