My Sightseer didn't have levelers and I bought a NOS Power Gear system to install on it but there is no installation instructions. Power gear was helpful but had no instructions for this system. My question is where is the best location for them on the chassis? In front of the differential? Behind it? What about the front ones? Thanks
On our 2008 Sightseer 29R F53 chassis the fronts are just behind the wheels at 4' from the front of the frame rail. The rears are a bit back from the axle and are 5' from the rear of the frame rail. That's on the Ford 16,000 lbs chassis. I can post pics or get more exact measurements if you'd find it of use.
Al
__________________
Al and Deedee - Spokane, WA
2008 Winnebago Sightseer 29R F53, JMcKinley CHF, 5 Star tune, 2006 Honda CR-V, Blue Ox Aventa towbar
On our 2008 Sightseer 29R F53 chassis the fronts are just behind the wheels at 4' from the front of the frame rail. The rears are a bit back from the axle and are 5' from the rear of the frame rail. That's on the Ford 16,000 lbs chassis. I can post pics or get more exact measurements if you'd find it of use.
Al
Thanks for the offer but I think I got a good idea from what you say and the info I downloaded. Thanks again