TV removal & replace

[AG Bruns]

RE; Voyage 33v

I am trying to remove the cover under the tv. There are several screw
cover on under side. How do you remove the covers for access to the
screws. without making a mess out of the covers.
thanks Alvin

[The Sunde's]

AG, If your screw covers are the same of mine the best way I found is to use a small knife. Just use the point to slip under the cover and flip it out with the knife point. Make sure you cover your defroster vents as not to have them disappear down the vents.
Good luck.

[Olive]

I removed mine just this morning and did exactly what The Sunde's suggested. I used the tip of a fine knife blade to pop the cover off.

There is a little tab on the underside of the cover so if the blade doesn't slip behind the cover easily move a little and try again. They pop out quite easy using a knife blade.

Now I'm just too anxious to get my new tv installed.

[AG Bruns]

thanks for the help. I did just what you said,
but didnot cover defrost vents ( lost one cover)

[mfire1339]

Murphy strikes again!

[AA4WP]

I still have the screw covers, screws, and plastic shroud from under the TV cage. If you are like me, you will not replace those parts; only cosmetic. If you install the new TV inside the cage, you will like having the extra air circulation possible when the plastic is off. We don't miss the cover at all.

I wonder what you are going to install now.

Wendell

[AG Bruns]

Thanks for asking; This is a information exersice to see what is
thier and to get measurements. Also see what other have done.

Mounting is the most inportant for safety, I'am up front with this thing
and don't care to have it in my lap.

AG