|
01-19-2011, 08:23 AM
|
#1
|
Winnebago Owner
Join Date: Jun 2010
Posts: 244
|
rear tv channels
I have 2002 adventure 35u with the box in the overhead front compartment to select the source to view your tv. I do not get all of the channels on the rear tv that I get on the front. I am using my batwing anttenae. when we are on cable everything seems fine. it has been this way every since I have had it. I checked all the connections in the overhead cabinet and behind the tv. I now have an HD tv in the back with the same results. does anyone have any ideas as to what to check for? is the coax going to the rear tv a straight shot or is there a connection some where that might be loose?
|
|
|
01-19-2011, 08:32 AM
|
#2
|
Winnebago Owner
Join Date: Apr 2007
Posts: 115
|
MIKF I have been having the same problem with mine I think it is the switches wearing out in the box. If I switch back and forth many times this will often fix the problem for awhile. Will take the box out soon and clean with tuner cleaner from radio shack some day this may help but feel the box will need to be repaced.
__________________
2001 Horizon 2004 jeep GC
|
|
|
01-19-2011, 08:48 AM
|
#3
|
Winnebago Camper
Join Date: Nov 2010
Location: Grapevine, TX
Posts: 10
|
Did you go into your TV's menu and have it do a channel search? It needs to find the channels each time you change the source (i.e., cable, antenna, etc.)
Mike
__________________
Mike
2005 Kountry Star 3907, ISC330, Spartan chassis, M&G braking, Blue Ox Aventa XL
|
|
|
01-19-2011, 11:51 AM
|
#4
|
Winnie-Wise
Join Date: Nov 2002
Location: Crossville, TN USA
Posts: 397
|
Could just be that you have 2 different TV's. I have had this problem in past MH's. Some TV's have a better tuner. Usually rear TV's are a cheaper model than the main one.
__________________
Tom & Bonnie
2008 Winnebago Aspect 29H
A Class C Not a B+
2010 Ford Flex
|
|
|
01-19-2011, 02:12 PM
|
#5
|
Winnebago Owner
Join Date: Apr 2007
Posts: 115
|
Have owned unit from new, frt and rear tv worked the same for the first 8 yrs, rear tv not getting all ch. has only happened for the last few yrs and this is getting worse with time as I said before switching the box many times will fix the problem for awhile. So would guess it is the box/
__________________
2001 Horizon 2004 jeep GC
|
|
|
01-19-2011, 02:33 PM
|
#6
|
Winnie-Wise
Join Date: Oct 2009
Posts: 277
|
Quote:
Originally Posted by mikf
I have 2002 adventure 35u with the box in the overhead front compartment to select the source to view your tv. I do not get all of the channels on the rear tv that I get on the front. I am using my batwing anttenae. when we are on cable everything seems fine. it has been this way every since I have had it. I checked all the connections in the overhead cabinet and behind the tv. I now have an HD tv in the back with the same results. does anyone have any ideas as to what to check for? is the coax going to the rear tv a straight shot or is there a connection some where that might be loose?
|
Mine is the same way and I have checked everything. There was a post some time ago that gave suggestions on what could be wrong and we still have the same situation. One poster said that the tuners are different if the TVs are not the same brand and model. I noticed that when on cable you said they get the same channels, so I would think that the tuners ARE the culprit. We haven't been on cable yet.
That info helps. Thanks, Joe
__________________
2008 Itasca Latitude 39W. Cummins ISB 6.7 Turbo 340HP. Allison 6 Speed. Freightliner XCS. Michelin XRV 255/80R 22.5 LRG. SuperSteer MCU. Safe-T-Plus.
|
|
|
01-19-2011, 06:21 PM
|
#7
|
Winnebago Master
Join Date: Aug 2008
Location: Texas
Posts: 1,666
|
The tuners not being from the same manufacture mean that they can have a different sensitivity to the signal being supplied. In most cases the "booster" is near the main tv. It may be the problem in not being able to supply a high enough signal level to the rear tv. To see if it may be a booster problem, (when on the batwing) switch the cable from the front and rear tv on the booster and see what happens. Of course, your labeling will be wrong on the booster. If it is the booster, it can be replaced. If it is not the booster and the signals remain the same, you could have a loose or bad connection on the line going to the rear tv. That is a hard one to check, but it can be done with an ohm meter. Disconnect the lead at both ends of the coax and meter across the center conductor and shield (ground). You should not see a reading between the two if the wire is not connected at either end. If you do see a reading on the ohm meter - replace the wire. If the wire is good, try another booster closer to the rear tv. They are relatively inexpensive for a 1 tv set booster.
If nothing works - trade in the MH for on that does. (lol)
Good luck.
p.s., most likely you will not have an "open" when you check the coax. That can be checked by buying a cheap roll of #22 wire at Shady-o-Rack, have someone hold one end to the center conductor and take the other end to the other end of the coax. Meter between the 22 gauge wire and the center pin. You should see a full continuity in that connection. Do the same for the ground side of the coax.
Come park next to me, or in the vicinity and I'll check it for you.
__________________
Wayne MSGT USMC (Ret) & Earlene (CinCHouse)
2015 Winnebago Tour 42QD - 2020 Lincoln Nautilus Reserve (TOAD)
(RVM-14) It is what it is, and then it is what you make of it.
|
|
|
01-19-2011, 08:03 PM
|
#8
|
Winnebago Owner
Join Date: Jun 2010
Posts: 244
|
thanks for all the replys. I did the thing with swapping the front and rear outputs. no help. disconnect the selecter box and ran a cable on floor to rear TV. every thing was good. bypassed the selecter box for the rear TV with a splitter. get all channels now. only problem if I go to a park with cable I will have to get back behind the selecter box and move wires around. I think I may be able to do something wit an A/B switch, but we are here till april so I will worry about that later. thanks again
|
|
|
01-20-2011, 06:32 AM
|
#9
|
Winnebago Master
Join Date: Mar 2008
Location: Southern Ontario
Posts: 562
|
You might want to get the Coax wiring diagram from the winnebago site. On my Journey, I have identical TVs front and rear. The rear TV actually gets more channels than the front which I attibute the difference in length of coax used. I have installed a Satellite system and added HD cables and in the process noted that the Winnebago coax connectors installed at the factory look like they were crimped with pliers rather than a proper tool. This would add a small loss as well. As others pointed out, corrosion on the switch connectors could also contribute. In summary, it is likely the result of a number of small but collectively significant losses including differences in the actual TV tuners. Not an easy thing to rectify.
__________________
Bob
09 Journey 39Z
Southern Ontario
|
|
|
01-20-2011, 07:03 AM
|
#10
|
Winnebago Camper
Join Date: Jan 2009
Location: Orange Beach, AL
Posts: 25
|
Try removing the antenna input cable and the cable leading to the read TV from the switch (box) and temporarily splice them together with a barrel connector (threaded on both ends). If the TV works properly then you have a bad switch.
Good luck.
|
|
|
01-20-2011, 11:19 AM
|
#11
|
Winnie-Wise
Join Date: Jul 2009
Posts: 296
|
If your unit has a connection for an outside TV, it is probably using a splitter from the rear coax. A minimum 3db loss from the splitter plus another 1 or 2db for the fittings and longer cable may make the difference.
__________________
ernieh
2019 Phaeton 37BH
2003 Journey DL
|
|
|
01-21-2011, 06:37 PM
|
#12
|
Winnebago Camper
Join Date: Mar 2009
Posts: 11
|
I have a similar problem in my 35L. The splitter for the outside TV is located behind the control panel for the furnace, generator, holding tanks, etc. I removed it with the same results. I had a digital converter for the front and one for the rear TV. The rear saw almost no channels. Prior to the digital age the rear TV had noise on the signal. I now use the converter for the front TV and switch it through the aux port until I can get back to trouble shooting in warmer weather. I will try a new temporary coax to the rear and see what that does.
__________________
2007 Itasca Sunrise 35L
2008 HHR toad
Amateur K4TBI 146.52
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|