Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-01-2010, 11:27 PM   #1
Winnebago Camper
 
Join Date: Dec 2009
Posts: 6
Light bulb Change

Has anyone change the light bulb in a G.E.Profile "Advantium" oven? Do I need to pull it out or can it be reached from the front ? Too cold to run to the rig and read the book..Happy New Year and good traveling.

Don,WIT70041
Getting Old is offline   Reply With Quote
Old 01-02-2010, 10:12 AM   #2
Winnebago Owner
 
Pushrod's Avatar
 
Join Date: Apr 2006
Location: Camano Island, Washington
Posts: 63
The only reference I find to "changing light bulbs" is on page 41, and it is the work light. You can go to GE Advantium Manual on line and check it out. I think we have an interior light (not cooking lamp) out, haven't figured out where it is yet. Good luck.
__________________
"Time is Nature's way of not letting everything happen at once."
2015 Itasca Meridian 40R
2010 Escape
Pushrod is offline   Reply With Quote
Old 01-02-2010, 12:12 PM   #3
Winnebago Master
 
cbeierl's Avatar
 
Join Date: Aug 2005
Location: Nashua, NH
Posts: 1,823
Here's a link to a posting on the the Yahoo Advantium group which
describes how to replace that light: Interior Light Replacement....How
To
(You may need to join the group to read the message.)

On edit: I got a couple replacement bulbs from RepairClinic.com: PartNo 1163212
__________________
Chris Beierl

2005 Winnebago Vectra 36RD
cbeierl is offline   Reply With Quote
Old 01-04-2010, 08:45 PM   #4
Winnebago Owner
 
BBBEEBOP's Avatar
 
Join Date: May 2003
Location: Sayre,PA USA
Posts: 178
Here's whAT the Yahoo Advantium site says:

IF YOU ARE BRAVE/HANDY?FOOLISH... call and get them to send you
bulbs, go for two, for FREE. And follow these directions.

1. Unplug unit
2. Remove two screws on top front of unit that hold grill in.
3. Lift out grill
4. one screw in front left corner of exposed flat area, remove.
5. small metal box under plate, to the right side, remove it by
slightly squeezing it to disengage tabs. Lift out remove bulb.
6. Install new bulb, hold with a clean cloth, fingerprint oil will
shorten life of halogen bulb.
7. Reverse procedure.
Most people will need step stool or short ladder to look down into
the hole where the bulb is.
__________________
Bob, Laurie & Missy
2013 Itasca Cambria 27K
BBBEEBOP is offline   Reply With Quote
Old 01-06-2010, 08:17 AM   #5
iRV2 Marketing
 
DriVer's Avatar
 
Join Date: Jan 2000
Location: Conway, SC
Posts: 886
So I guess that the 2 guys and a ladder trick won't work in this case!
DriVer is offline   Reply With Quote
Old 01-06-2010, 11:44 AM   #6
Winnebago Owner
 
BBBEEBOP's Avatar
 
Join Date: May 2003
Location: Sayre,PA USA
Posts: 178
Nope 2 guys and a ladder won't work! In fact, dental tools, specifically a mirror will help to find the little box that the bulb is in.
Seriously, it's not an easy job, but with a little patience, you can get it changed. It took about 30-45 minutes to get it apart and then back together. Probably on a scale of, 1 being the easiest, I give it a 2 1/2. Those with smaller more dextrious fingers might give it a 2. Good Luck
__________________
Bob, Laurie & Missy
2013 Itasca Cambria 27K
BBBEEBOP is offline   Reply With Quote
Old 01-09-2010, 12:04 AM   #7
Winnebago Camper
 
Join Date: Dec 2009
Posts: 6
Thanks guys for the info, looks like a flashlight might do just as well. These old hands would probably bleed all over the oven, but will give it ashot.

Don, WIT 70041
Getting Old is offline   Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
How do I change a light bulb? stearn Electrical | Charging, Solar and Electronics 12 12-14-2008 06:35 AM

» Featured Campgrounds

Reviews provided by

Disclaimer:

This website is not affiliated with or endorsed by Winnebago Industries or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 07:23 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.