It is possible to run camp calb and satellite on tv at the same time? Only two outputs above the TV, one picks up cable, the larger amplified one inputs the antennae. Where do I find an output for park cable? Right now I am only finding satellite and not the cable.
Location: Sarnialabad, Peoples Republik of Canuckistan
Posts: 1,251
Maybe use a switchable cable splitter on the input cable into the TV?
Like this https://www.amazon.com/RCA-VH71-B-Sl...016K39A2JNH32H
Plug the satellite feed into the ANT side of the splitter, and the camp cable into the CABLE side. Leave your external OTA antenna feed alone.
You can probably get 'em at Best Buy or any electronics shop, too.
Not a very complex item as we now see electronics. We used to use a switch when we tied a game to the TV and wanted to leave the antenna alone. Add a switch for around $5 from many of the big box stores and switch from one input to the other by flipping the switch.
Depending on how the switch is thrown, I get cable from the cable connection ( if I have cable) or from the satellite when I use it.
You can buy a duplexer to mix cable and raw SAT signals together on to one cable and then use another to split the two signals back apart. This however is upstream of the SAT receiver. I can’t tell if that’s what you are looking for or to put both signals directly to the TV downstream of the SAT receiver.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
Linear Mode
