Booster switch has quit working

[YC1]

Originally Posted by Journey cat

Bringing it to the top .
Can any one tell me if the salesman switch should make any noise from making contact ? Similar to the Aux boost solenoid .
It appears mine may be bad . As I have the same voltage to the heavy cables .
No matter if its on or off . Although I can read voltage from the 2 small wires .
One at a time , when the dash switch is toggled to the approiate mode .
So its always on . My guess is its bad
Can these be cleaned also ?
On another note I did get a silver contact replacement solenoid for the Aux start

You may be able to clean it but I don't think I have ever taken one of those apart. I bypassed mine even though it was not bad. I didn't want it to ever get turned off accidently.

[Journey cat]

wWl as said I am reading 12 plus no matter what position .
Just wondering if I should hear a click .
I would replace rather than repair

[YC1]

You should indeed hear a noise when it activates and deactivates.

[Journey cat]

Originally Posted by YC1

You should indeed hear a noise when it activates and deactivates.

For now ill leave it as its charging both batterys
But in the future , will replace it and take the old apart for giggles as it appears to be screwed together with phillips