I installed my roll-up window a couple of days ago, and my wife is thrilled that she will now have a clear view of the scenery on our trip to Alaska next month. I called the tech support to ask what size screws to use to mount the roll unit, and they were very helpful, recommending #6 by .5"(half-inch) self tapping or regular (with pilot holes) sheet metal screws. If you use Stainless screws, drill the PROPER SIZE PILOT HOLE, or you will break off the screw in the hole. I would recommend the self tapping route. Just make sure you do a "dry run" with the double sided tape NOT peeled off first, you will only have one shot for real. All in all, not a bad project, and a wonderful addition to our 36G Meridian. I highly reccommend this product.
__________________
"Time is Nature's way of not letting everything happen at once."
2015 Itasca Meridian 40R
2010 Escape
|