My LP bleed valve does not work. When they open, to fill, nothing comes out. When the tank is full it stops the pump. The guys filling say they are not supposed to fill unless the bleed valve is draining while filling. I tried a pin in the screw when open to see if it was plugged. Wat is going on? Thanks!
They get dirty and sometimes are slow or reluctant to open. Wash it with soap or something. I used Windex on mine and worked at it a little and it started working properly.
__________________
2017 Winnebago Adventurer 37F
2016 Lincoln MKX Toad
Follow the line on the bleed valve on the remote fill station back to the tank. You will see a valve mounted at the tank - open that valve and leave it open. All fixed.
An LP tech in Nebraska caught this on my 2017 and it was fixed in seconds. Either the dealer or Winnebago is suppose to open this valve after installation.
__________________
Roger & Mary
2017 Winnebago Navion 24V
2014 Tiffin Phaeton 36GH (Sold)
I found another relief valve at the other end of the hose, but it does not have a pin hole in it. So that appears to be what you have mentioned. It was closed. I opened and will try filling tomorrow to see if that solved the problem. Thank you!
Thanks luvlabs for your input! Thanks ds1392 for raising the issue! We have a 2017 View 24G and I was preparing to burn off a half a tank of propane so that I could remove the bleeder valve. Crawled under the motorhome this morning and identified the valve and my issue is also resolved. I couldn't directly follow the bleeder line back so I at first thought it was the round gnarled valve that I saw first. Looked a little further and there was a 3 point valve that I opened and problem solved! Thanks!