Does anyone know where (exactly) the level sensing unit on my rig is located? Mine is stuck in the left front down position and will not change. Can jack the rig all over the place and the lights do not change. Help!
Does anyone know where (exactly) the level sensing unit on my rig is located? Mine is stuck in the left front down position and will not change. Can jack the rig all over the place and the lights do not change. Help!
Bingo Chris, Mine is in the control box also!!Output does not change with position, guess I get to call HWH tomorrow. I remember they were pretty good to work with. Wish me luck. Thanks for the help Chris.
bill j - Mine failed last year. Luckily, while still under warranty - can't remember now whether warranty was an issue or not. I know they just shipped me a new level sensor board and I had to return the old one. It's not much trouble to change out. I did it from underneath without removing the control box (that would be a PIA cause there's a bunch of cables to be disconnected). As I remember, you just roll back the rubber collar around the clear faceplate and the faceplate comes off. Changing out the pc board/sensor was simple. I had more trouble getting that rubber collar properly replaced than anything else. Good Luck...
Yes Tom, I removed the clear cover to check the board out. How does the sensor board come out? I'm not going back under there tonight. Just got back from boon-docking this afternoon and that's when it failed. Tomorrow's another day, ain't Rv'ing fun? Thanks for the info.
Sorry, Bill, I can't remember (CRS) what was involved in changing the board. I just know I'm not too handy and, if it had been hard, I would've remembered. I do remember messing with that rubber collar for 10 or 15 minutes trying to get it right.
Linear Mode
