|
05-10-2007, 06:59 AM
|
#1
|
Winnebago Owner
Join Date: Nov 2000
Location: San Jose, CA
Posts: 87
|
I just purchased a Fan-Tastic Fan to replace the existing roof vent. I found the wires tucked in the foam insulation in the ceiling so I think I am good-to-go. I am going to use a silicone/caulk sealer for the roof. Are there any other things I should be aware of when I install the fan?
__________________
2005 Winnebago Sightseer 30B, F53 Chassis
|
|
|
05-10-2007, 06:59 AM
|
#2
|
Winnebago Owner
Join Date: Nov 2000
Location: San Jose, CA
Posts: 87
|
I just purchased a Fan-Tastic Fan to replace the existing roof vent. I found the wires tucked in the foam insulation in the ceiling so I think I am good-to-go. I am going to use a silicone/caulk sealer for the roof. Are there any other things I should be aware of when I install the fan?
__________________
2005 Winnebago Sightseer 30B, F53 Chassis
|
|
|
05-10-2007, 08:10 AM
|
#3
|
Winnebago Master
Join Date: Dec 2005
Location: Buxton, North Dakota
Posts: 1,037
|
I would use some type of butyl strip for sealing. This allows you to squish the insulation and make a good seal. The butyl is also easily removed if you need to take the fan out and reseal it.
__________________
2003 Winnebago Adventurer 38G F53/ V10 605 watts of Solar
1999 Winnebago Brave 35C Handicap Equipped
F53/V10
1999 Jeep Cherokee & 1991 Jeep Wrangler Renegade
|
|
|
05-10-2007, 08:35 AM
|
#4
|
Winnebago Master
Join Date: Aug 2004
Posts: 530
|
Silicon will not last long on the roof. Most of the mfg's use Dicor or dicor type product. It is a self leveling sealer that is about the best sealant for the job. Although designed for epdm roofs it works great on fiberglass also.
Jim
__________________
2011 Mobiles Suites, 2011 Chevy 3500 Dually
Our Webpage
|
|
|
05-10-2007, 08:56 AM
|
#5
|
Winnebago Camper
Join Date: Aug 2005
Location: Mt. Clemens, Mi.
Posts: 39
|
I agree...stay away from the silicone! I'm almost 100% sure that this Dicor product is what's on my roof around all the vents etc. Still in great shape 11 years later!
__________________
Fred & Wilma
'96 - 38' Adventurer
|
|
|
05-10-2007, 08:11 PM
|
#6
|
Winnebago Owner
Join Date: Nov 2000
Location: San Jose, CA
Posts: 87
|
Where can I purchase the Dicor product?
__________________
2005 Winnebago Sightseer 30B, F53 Chassis
|
|
|
05-10-2007, 08:21 PM
|
#7
|
Winnebago Camper
Join Date: Apr 2000
Location: Lake Almanor, CA USA
Posts: 11
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by BigRedLancer:
Where can I purchase the Dicor product? </div></BLOCKQUOTE>
Log onto the RVUPGRADES website accessible from iRV2's website (look at the ad at the top of this page).
RVUPGRADES is a great company to deal with. Use the pull-down window on the left side of their home page (manufacturers) and scroll down to DICOR. They have quite a long list of products that will help you get your fan installed without worrying about leaks.
__________________
Paul <?)))>< Lake Almanor, CA
2002 Thor Tahoe 23FBGL TT, 28'
|
|
|
05-10-2007, 10:11 PM
|
#8
|
Winnie-Wise
Join Date: Nov 2002
Location: Crossville, TN USA
Posts: 397
|
CAUTION!!
We had our Satalite dish installed on roof. They usede rubber roof sealer on our fiber glass roof. It did not seal well. Roof leaked and it ended up costing the dish installer a new TV, plus haveing to remove the dish are reseal with the right sealant. Fan-Tastic Fan will get you the right stuff. May even send it to you free.
__________________
Tom & Bonnie
2008 Winnebago Aspect 29H
A Class C Not a B+
2010 Ford Flex
|
|
|
05-11-2007, 10:51 AM
|
#9
|
Winnebago Owner
Join Date: Nov 2000
Location: San Jose, CA
Posts: 87
|
I looked on FanTastic Vent's web site in their FAQ section and the installation instructions they post says to use Silicone along the edge of the vent flange and the screw heads. I guess I will use Silicone.
__________________
2005 Winnebago Sightseer 30B, F53 Chassis
|
|
|
05-11-2007, 11:32 PM
|
#10
|
Winnebago Master
Join Date: Dec 2006
Location: Santa Clarita, CA.
Posts: 1,222
|
Fantastic is a great company to deal with, but I think they're wrong on this one. Gorilla Snot is the last thing I'd use to seal this with.
__________________
_______________________________
Jeff - WA6EQU
'06 Itasca Meridian 34H, CAT C7/350
|
|
|
05-13-2007, 04:03 AM
|
#11
|
Winnebago Watcher
Join Date: Jul 2002
Location: Broussard, LA
Posts: 1
|
Dicor self-leveling can be found at about any rv parts store, but if you use this product you must prep both the fan and your roof by cleaning it with denatured alcohol so it will stick to both. Also you may want to lube the switch under the fan cover?
__________________
Jim & Myong Warren 2007 Journey 36G
2007 Saturn Vue Frog
|
|
|
05-13-2007, 04:17 AM
|
#12
|
Winnebago Master
Join Date: Sep 2004
Location: Glen Allen, VA
Posts: 2,169
|
Or, you could get one of the Eternabond kits designed specifically for intalling roof vents.
__________________
'07 Country Coach Allure 470 Siskiyou Summit #31578, Cummins ISL 425; 2014 Ford F150 toad; Air Force One Toad Brake.
Glen Allen, VA; Smith Mountain Lake, VA.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|