Hi folks.
I had a previous thread about the bedroom slide in my 2005 Voyage 36M not working (
http://www.winnieowners.com/forums/f...ml#post3831135). I now think it's the controller board.
The Bedroom slide isn't working. There is no response on the LED light on the touch pad (even if the parking brake is not on, the red light won't blink).
I swapped the touch pad with the touch pad for the (working) front slide and have verified that the same problems exist.
I got down to the controller underneath the slide, and verified that there is 12V coming into the controller.
So at this point, I'm thinking that the controller went bad somehow. I'd like to replace it, but don't know what controller it is to order a replacement.
It's a Kwikee slide, and the controller board says "Kwikee Products Co. DigiSync Rev 2.1", but again, nothing that looks like a model number. I'm including pics of the controller and housing. You can see from the pics that there's no obvious signs of "letting the smoke out", so nothing obvious like a blown capacitor or anything.
I tried calling Lippert Industries, and they merely said "send us a picture and maybe we'll figure out what it is, but we don't work at kwikee so there's no guarantee that we'll figure it out".
In any case, if anyone knows what controller this is, I'd really appreciate it.
Thanks!