|
05-16-2005, 03:45 PM
|
#1
|
Winnebago Camper
Join Date: Feb 2004
Location: Canton, Ga.
Posts: 12
|
I was in Tenn. this weekend and had to use the heater in my 04 Advn. Last night after running for awhile it started to make a noise. I went outside and the back panel of the MH was vibrateing making the noise. I think I may have gotten dirt in it in Ak. last summer. Maybe something in the squerrial cage. Anyone have any ideas. Also how to get to the heater itself to look. An help would be appreciated.
Charles
__________________
2004 Winne Adv 33
2004 Honda CRV 4wd
|
|
|
05-16-2005, 03:45 PM
|
#2
|
Winnebago Camper
Join Date: Feb 2004
Location: Canton, Ga.
Posts: 12
|
I was in Tenn. this weekend and had to use the heater in my 04 Advn. Last night after running for awhile it started to make a noise. I went outside and the back panel of the MH was vibrateing making the noise. I think I may have gotten dirt in it in Ak. last summer. Maybe something in the squerrial cage. Anyone have any ideas. Also how to get to the heater itself to look. An help would be appreciated.
Charles
__________________
2004 Winne Adv 33
2004 Honda CRV 4wd
|
|
|
05-17-2005, 02:01 AM
|
#3
|
Winnie-Wise
Join Date: Aug 2003
Location: NE Ohio
Posts: 387
|
Charles, I assume the furnace had worked OK and has been relatively quiet in the past, until now, right? -Likely you've got some mud dauber wasp nest in the squirrel cage fan, or near it. To slide the furnace out, it's a job, but not overwhelming. Turn off the propane at your tank. Remove the four cover screws to expose the furnace. From there, depending on your model, the furnace frame will either be secured by small sheet metal screws, or in some cases, bolts/nuts. Getting the furnace out, disassembling & cleaning, then re-installing will take a good half-day.
__________________
Last Brave 2004 34D
|
|
|
05-23-2005, 05:19 PM
|
#4
|
Winnebago Camper
Join Date: Feb 2004
Location: Canton, Ga.
Posts: 12
|
troth, many thanks. I had tried to remove the rear plate when I came back from Ak. last summer and clean it out but couldn't get the cover off. I assume you will need to remove the exhaust? I'm sure it got dust in it in Ak.. I'll try again.
Charles
__________________
2004 Winne Adv 33
2004 Honda CRV 4wd
|
|
|
05-23-2005, 08:14 PM
|
#5
|
Winnebago Master
Join Date: Oct 2004
Posts: 629
|
Has anyone ever had "fried mouse" served in their furnace lately?
Well we had one this weekend, we were watching the news cast 11pm heared this loud thump, squeel, an vibration of furnace fan.
So I gets my old body on the floor pull back plate off an with a coat hanger proceed to start removing one tail, legs, fur an miscellaneous parts of a once mouse.
The only thing missing was the head.
I believe that is rolling around in the fan housing fused in blood to it causeing the vibration in the furnace.
When it stops raining I will take off plate outside to see if the head can join the other parts of once mouse. ---"007"
"YES, I have set four old style mouse traps for future mouse non- fries".
|
|
|
05-23-2005, 08:38 PM
|
#6
|
Guest
|
....turn off propane and kill the juice to the furnace and use a pressure washer on the exhaust and intake sides then compressed air.....turn on gas and electric when dry.......geofkaye
|
|
|
05-24-2005, 12:08 AM
|
#7
|
Winnebago Owner
Join Date: Mar 2000
Location: Chattanooga, Tn.
Posts: 100
|
Charles, if you were able to find most of the mouse inside the coach then the missing part will be on the inside section of the furnace. If you can give a model I can help better.
You will need to put the furnace. If there is a plate on outside wall you can pull it from outside. IF not you will have to pull it from inside. You will probably have to remove a screw or more from the outside vent are for pulling to the inside. Be sure to turn off the gas and pull fuse to the furnace before starting. Be sure to check for gas leaks when you are finished before starting furnace.
__________________
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7
|
|
|
05-24-2005, 04:45 AM
|
#8
|
Winnie-Wise
Join Date: Oct 2002
Location: Sheboygan, WI
Posts: 306
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Char N4FAP:
troth, many thanks. I had tried to remove the rear plate when I came back from Ak. last summer and clean it out but couldn't get the cover off. I assume you will need to remove the exhaust? I'm sure it got dust in it in Ak.. I'll try again.
Charles </div></BLOCKQUOTE>
Yep, the stainless exhaust flange needs to come off first on the 33V. Once that's off there is an insert tube that slides out as well. Then the cover can be removed. Be sure to caulk it up good when you replace it.
__________________
Mark & Leann Quasius
2016 Cornerstone 45A
2007 Allegro Bus 42QRP (Sold)
2012 Jeep Wrangler Unlimited - Rubicon
|
|
|
05-30-2005, 03:25 PM
|
#9
|
Winnebago Master
Join Date: Oct 2004
Posts: 629
|
<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by "007":
Has anyone ever had "fried mouse" served in their furnace lately?
Well we had one this weekend, we were watching the news cast 11pm heared this loud thump, squeel, an vibration of furnace fan.
So I gets my old body on the floor pull back plate off an with a coat hanger proceed to start removing one tail, legs, fur an miscellaneous parts of a once mouse.
The only thing missing was the head.
I believe that is rolling around in the fan housing fused in blood to it causeing the vibration in the furnace.
When it stops raining I will take off plate outside to see if the head can join the other parts of once mouse. ---"007"
"YES, I have set four old style mouse traps for future mouse non- fries". </div></BLOCKQUOTE>
I had some time at a Good Sam rally this weekend to check out my furnace an see what all the noise is while its running just as I thought a missing mouse head. It was stuck between the blower fan an cut out for air intake. It was in pretty good shape considering it had no body parts, they were dispersed last Sat. night on to the heater coils. Just a reminder if your breads or cakes in your bread draw have what you think is air pockets in them, they may have been caused by a once mouse. ---"007"
|
|
|
05-31-2005, 02:54 AM
|
#10
|
Winnebago Master
Join Date: Jan 2005
Location: Back at the ranch
Posts: 2,041
|
Where would place the mouse traps - scattered around the chassis?
-John
__________________
--John
2005 Horizon 40AD, 2005 Jeep Liberty CRD
|
|
|
05-31-2005, 03:02 AM
|
#11
|
Winnie-Wise
Join Date: Aug 2003
Location: NE Ohio
Posts: 387
|
John, as for 'prevention', other threads have said a dryer sheet, like Bounce, placed in the cabinet will keep out critters & bugs. Still others use mothballs inside an old prescription bottle w/ a few small holes drilled in. Personally, I use both.
__________________
Last Brave 2004 34D
|
|
|
05-31-2005, 06:33 AM
|
#12
|
Winnie-Wise
Join Date: Jul 2004
Posts: 409
|
Congrats on the new MH John.
In your case, the mice etc haven't left a urine trail leading into your motorhome so they don't have a map. It would be best for you to put baited traps in your shed and near but not in your motorhome as the bait also attracts the critters.
Retail stores have adequate pest control devices but for me this thing is all out war and I get my poison cubes from a licensed pest control guy. They have little houses that you put the poison in that keeps the pets out. Plastic containers with a 1" hole cut in them works too for a lot less money.
If a squirel comes along and can't get in the 1" hole, not to worry, they just rip the lid off and dine. There usually is a licensed pest control person in most locations. Try to find a smaller operator who has a vested interest in your satisfaction. I found the big name guys really don't give a hoot what happens.
Tractor Supply, Fleet Farm type stores sometimes have the better pest control products but nothing like the licensed pest control people.
__________________
DonavonP
2016 Jayco White Hawk 27dsrl
2015 Chevrolet Silverado 2500 diesel 4x4
|
|
|
05-31-2005, 07:04 AM
|
#13
|
Winnebago Watcher
Join Date: May 2005
Location: Salt Lake City, UT
Posts: 3
|
Well, again I am learning from this forum! I know we use the bounce-type sheets to keep wasps from entering the fresh air vent at our house, but had not thought about using them on the RV! Thanks, Troth!
__________________
Bob and Kathleen Hartman
2004 Dodge Cummins Diesel H.O., Dually, 4-dr. long box, 6WD.
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|