The electric door awning on my 08 Ellipse does not quite come in far enough to tighten up the cover. In windy conditions or driving on patchy pavement I can here it banging. Has anyone else experienced this. The awning is a model 975 and does not have a manual crank.
The electric door awning on my 08 Ellipse does not quite come in far enough to tighten up the cover. In windy conditions or driving on patchy pavement I can here it banging. Has anyone else experienced this. The awning is a model 975 and does not have a manual crank.
The one on my Vectra doesn't close properly either. But if I "cycle" it a couple of times it works OK. It's slightly out of alignment - as a result of stupid me driving about a mile with the awning out. :clumsy:
John, when my awning is rolled out the right side is 1/4 inch longer than the left side, When I roll it in the right side does not tighten up as much as the leftside also there is a 1/8 inch gap on the left side and 3/8 inch on the right side when the awing is closed. Does this look like the right arm should be moved slightly to the right (out) ?
Is there a adjustable limit switch for the awning motor?
Ouch - I just noticed some typos in my earlier post
Sorry - don't think moving the awning fore or aft will have any effect on your problem. Unfortunately Dometic (A&E) makes it virtually impossible for a customer to actually talk to somebody that has a clue about product troubleshooting.
Unless you can figure out the problem, you might need to get the coach to a Dometic dealer that does awnings.